Skip to content
Sole & Splay

How to clean barefoot shoes

Cool water, insoles out, no heat anywhere. The whole method takes fifteen minutes and a day of patience.

Take the insoles out, let mud dry and brush it off, then hand wash the upper in cool water with a few drops of mild detergent and dry at room temperature with the shoes stuffed. The machine is a last resort and heat is the real enemy: it shrinks knit uppers and attacks the glue line on a thin sole.

How this page is funded: some links here are Amazon affiliate links, so we may earn a commission if you buy — at no extra cost to you. It never changes which products we include or how we rank them, and we take no payment from brands for placement. Full disclosure.

Looking down at a pair of white sneakers standing either side of a painted road line

Barefoot shoes need a gentler clean than conventional trainers, for a reason that is structural rather than fussy. A thin, flexible sole is bonded to a soft upper across a large area, and there is very little stiff material holding the shape. Heat and prolonged soaking attack that bond and shrink knit uppers, which is how a perfectly good pair comes out of a wash tight, curled or unglued.

The method below is the one we would use on any shoe on this site. It takes about fifteen minutes of work and then a day of leaving them alone, which is the part people skip.

What you need

  • A soft brush - an old toothbrush for seams, a nail brush for soles
  • A few drops of mild detergent or dish soap. Not bleach, not solvent, not laundry powder
  • Two cloths, one for washing and one for drying
  • Newspaper or an old towel for stuffing
  • For leather shoes only: a leather conditioner, and no detergent at all

The method, step by step

  1. Take everything out

    Remove the insoles and slacken or remove the laces. Insoles trap most of the moisture and nearly all of the smell, and they dry far faster out of the shoe than in it.

  2. Knock off the dry dirt first

    Let mud dry completely, then knock the soles together outdoors and brush the upper with a dry soft brush. Washing wet mud pushes it into a knit upper instead of taking it off.

  3. Hand wash the upper in cool water

    Use cool or lukewarm water and a few drops of mild detergent on a soft brush or cloth. Work in small circles on knit and mesh. Cool water matters: heat is what shrinks a knit and unglues an outsole.

  4. Wash the insoles separately

    Same cool water, same mild detergent, both sides, then press them between a towel. Never put a thin insole in a dryer - it curls and stops sitting flat.

  5. Rinse without soaking

    Rinse the upper with clean cool water rather than submerging the whole shoe. Fully soaking a shoe wets the glue line and the midsole, which is what adds days to the drying time.

  6. Dry at room temperature, stuffed

    Stuff the shoes with paper or a dry towel, change it after a few hours, and leave them at room temperature out of direct sun. No radiator, no tumble dryer, no hairdryer - heat is the single most common way a barefoot shoe gets wrecked.

  7. Put the insoles back only when dry

    Both the shoe and the insole need to be fully dry before they go back together, or you have built a damp, dark box - which is how the smell starts in the first place.

Can you put barefoot shoes in the washing machine?

This is the most-searched version of the question, so here is the direct answer: sometimes, and it is never the best option. Some knit shoes survive a cold, short, gentle cycle inside a laundry bag with the insoles and laces removed. Others come out shrunk, with a sole edge lifting, or with the knit distorted around the heel.

What makes the difference is construction, not brand loyalty. Things that raise the risk: any leather or suede, any shoe with a printed or bonded overlay, a glued-on outsole edge you can already see lifting, and a spin cycle fast enough to batter them against the drum. Things that lower it: a single-material knit upper, a laundry bag, cold water, the shortest cycle, and no spin.

If you are going to do it anyway — and we understand why — do it to the cheapest pair you own rather than the expensive one, and never put them in a dryer afterwards. The 10 minutes of hand washing is genuinely faster than replacing a shoe.

Leather is a different job

Leather barefoot shoes and boots — the Vivobarefoot Tracker, soft-leather work boots, leather everyday shoes — must not be washed the way a knit shoe is. Detergent strips the oils out of leather, and soaking then drying it leaves it stiff and prone to cracking at the flex line, which on a barefoot shoe is the whole forefoot.

Instead: brush off dry dirt, wipe with a barely damp cloth, let it dry slowly at room temperature away from heat, and then condition it. Treated leather on a work boot also needs its waterproofing renewed periodically, which plain cleaning removes. Barefoot work boots covers which boots in the registry are leather and what each one is treated with.

How often, and what cleaning will not fix

For an everyday shoe, a proper clean every month or two and a brush-off whenever they are muddy is plenty. For a gym shoe, taking the insoles out after every session does more for the shoe than any amount of washing — how to stop barefoot shoes smelling is the companion page, because odor is a drying problem rather than a dirt problem.

Two things cleaning cannot fix. A compressed midsole does not come back, so a flattened zero-drop shoe is simply a thinner shoe now. And a worn-through outsole is the end of a shoe's life regardless of how clean the upper is — most durable barefoot shoes covers what fails first and roughly how long each type lasts.

The picks in detail

Three shoes that illustrate the three cleaning cases: a stretch knit, a mesh lace-up and a leather boot.

Saguaro Chaser (Smart II / Vitality III)

The roomiest of the budget marketplace brands - more space around the ankle and over the toes than WHITIN, which is the difference that matters if you have a thick foot.

What works

  • More instep volume than WHITIN at the same price
  • Whole-family sizing, including kids
  • Very minimal sole for the money

What does not

  • Thin, cheap outsole wears quickly on pavement
  • Model naming changes between generations, so repeat purchases are a lottery

Skip these if: You have a low-volume or narrow foot - this will feel like a slipper.

Specifications as published by the maker and reported by Anya's Reviews, Saguaro barefoot shoes review. We have not measured them ourselves. Saguaro fit profile

Xero Shoes Prio

The closest thing to a default first barefoot shoe: genuinely wide, genuinely flexible, and cheap enough that a failed experiment does not hurt.

What works

  • Removable 2 mm insole, so you can go thinner as your feet adapt
  • Wide enough for most square and plateau foot shapes
  • Flexes and rolls flat, which is the quickest way to spot a fake minimalist shoe

What does not

  • The lacing panel can pressure a high instep
  • Thin heel padding is noticeable on hard floors for the first week

Skip these if: You have a high-volume foot and dislike lace pressure across the top, or you need any cushioning at all on day one.

Specifications as published by the maker and reported by Xero Shoes Prio listing specifications. We have not measured them ourselves. Xero Shoes fit profile

Vivobarefoot Tracker (Leather AT / Tracker II)

Roughly a pound a pair, zero drop, water-resistant leather over the ankle. The default answer when someone wants a real boot that is still a barefoot shoe.

What works

  • Over-the-ankle leather that actually sheds weather
  • Puncture-resistant outsole, which almost no thin boot offers
  • Ankle padding without an ankle-stiffening cuff

What does not

  • Thinner underfoot than the work boots it gets compared to
  • Low volume - a wide foot with a high instep will struggle
  • No safety toe, so it is not site-legal work footwear

Skip these if: You need a safety-rated toe cap, or you carry heavy loads over rock and want underfoot protection.

Specifications as published by the maker and reported by Anya's Reviews, zero-drop and minimalist work boots. We have not measured them ourselves. Vivobarefoot fit profile

Common questions

How do you clean barefoot shoes?

Remove the insoles and laces, let any mud dry and brush it off, hand wash the upper in cool water with a few drops of mild detergent, rinse without soaking the shoe, then dry at room temperature with the shoes stuffed with paper. Put the insoles back only when both are fully dry.

Can you put barefoot shoes in the washing machine?

Sometimes, and it is never the safest choice. A single-material knit shoe in a laundry bag on a cold, short, no-spin cycle often survives. Leather, suede, bonded overlays and any shoe with a lifting sole edge should never go in, and nothing should go in a dryer.

What temperature should I wash barefoot shoes at?

Cool or lukewarm, never hot. Heat is what shrinks a knit upper and attacks the adhesive holding a thin outsole to the shoe, which is the failure that cannot be undone.

How do you dry barefoot shoes quickly?

Stuff them with newspaper or a dry towel and change the stuffing after a few hours - that does more than any amount of airflow. Room temperature and out of direct sun. No radiator, dryer or hairdryer, which cost you the shoe rather than a day.

How do you clean leather barefoot shoes?

Differently. Brush off dry dirt, wipe with a barely damp cloth, dry slowly away from heat and then condition the leather. Detergent strips the oils and leaves leather stiff and liable to crack at the forefoot flex line.

How often should I clean them?

A proper clean every month or two for everyday shoes, plus a brush-off whenever they are muddy. For gym or running shoes, pulling the insoles out after each session matters more than frequent washing.

Sources

  1. Outdoor Life, best barefoot shoes 2026 — stated stack heights and weights
  2. RunRepeat barefoot running shoes catalog
  3. Ridge et al., foot bone marrow edema after 10-week transition to minimal footwear

Accessed October 2026. Where a source is a manufacturer, the specification is theirs as published — we have not measured it.